Selleys Wet Area Ezi Press is ready to use – simply press the lever to apply – no caulking gun required. It provides a superior waterproof seal and resistance to unsightly mould. Ideal for wet areas like bathrooms and kitchens.
Best for : Ceramic, glazed and porcelain fixtures, Metal, copper and brass fittings, Powder coated aluminum, Aluminum, Plastic laminates, Rubber, Glass, Stainless steel, Concrete
No caulking gun required
Easy to hold and use
Superior waterproof seal
100% silicone – resists cracking, crumbling or peeling away
Mould resistant
Precision application for the best finish
- Showers
- Baths
- Spas
- Sinks
- Metals, copper and brass plumbing fixtures
- Ceramic, glazed and porcelain fixtures
- Metal, copper and brass fittings
- Powder coated aluminum
- Aluminum
- Plastic laminates
- Rubber
- Glass
- Stainless steel
- Concrete
Use in a well ventilated area. Avoid contact with skin and eyes.
1. Throughly clean and dry surface from oil, dirt and grease with mineral turps.
2. Remove tab lock, twist collar clockwise to MAX, remove nozzle cap, press lever to dispense.
3. Smooth with a spatula dipped in soapy water. Clean up before sealant skins (5-10 minutes) with a cloth dampened in mineral turps. Twist collar back to MIN and replace nozzle cap
4. Sealant will fully cure in 72 hours
Limitations:
• Not for use on polyethylene, polypropylene or Teflon. Pre-test plastics before use.
• Sealant is not paintable.Complete painting 7days prior to applying sealant.
• Not for aquariums or contact with food, eating utensils or drinking water.
- For a neat finish and easy clean up, tape both sides of the gap before applying the product.
- Work in sections that can be completed before sealant skins. Tooling off and tape removal must be completed before skinning occurs or a rough surface may result, so working in sections allows for a better finish.
- When first applying product, extrude a small amount onto a piece of scrap material to ensure a smooth continuous flow of silicone sealant.
- For a better finish use a spatula dipped in mineral turps or soapy water to tool off the sealant.
- Keep sealant cleaned regularly to avoid build-up of soap scum. Use Selleys Soap Scum Buster or Selleys Rapid Mould Killer
- Keep a pack of Selleys Sugar Soap Wipes handy to wipe up any spills and for cleaning any material off the skin before it cures.
Size: 100g Aerosol can
Technology: Neutral Cure Silicone
Use: Interior
- Uncured product may be removed with mineral turps.
- Cured product can be removed by cutting and scraping.