• Sky lights
• Windows frames and glazing
• Roof and gutters
• Sealing metal or PVC guttering and down pipes
• Air conditioners’ entries
• Sealing metal or PVC guttering and down pipes
• Shower screens
• Sinks and basins
• Sealing leaks in caravans and recreation vehicles

• Metal
• Timber
• Glass
• Glazed tiles
• Brick
• Stone
• Many plastics (may damage polystyrene and polycarbonate)

Use only in a well ventilated area. Avoid contact with skin and eyes and breathing vapors.

1. Surface must be free from dust, loose particles and soap residue. If required, clean with turps. Porous surfaces must be dry.
2. Cut cartridge, fit nozzle and cut to size. Insert the cartridge into a caulking gun.
3. Apply with caulking gun, forcing product into gap. Press into cracks or surface by pushing sealant ahead of nozzle.
4. Smooth sealant surface immediately with tool dipped in turps.

Limitations:

• May damage some plastics e.g. polystyrene and polycarbonate.
• Not for permanent water immersion e.g fish tanks
• Not suitable for use over silicone
• Not suitable for polystyrene foam

• Wet Surfaces: Can be applied to clean, wet non-porous surfaces e.g. metals, glass, glazed tiles – not wet porous surfaces e.g. concrete, timber. Remove as much water as possible, preferably with acetone. Keep nozzle close to surface so sealant contacts surface immediately. Flatten immediately into joints. Adhesion improves on drying.
• Skins immediately, maximum toughness achieved over several days.
• Paintable immediately with water-based paints. For oil-based paints undercoat first with a water-based paint.
• Store in cool dry conditions, below 30°C

Safety Data Sheet

Technical Data Sheet